multi-channel issue logic 8

[rob_fx (ex-FX)]

no...

tried 2 times


Hans

Well Guru v1.5.12 definitely had working multi-outs in Logic 8.0 on PowerPC, so the next question is "piloting error notwithstanding, has anything changed in Logic 8.0.2"?

I'll have to look at this sometime this week and see if I can replicate it. I would have thought that more people would have spotted this by now though.

[PrimoChris]

1.5.12 multi works fine in 8.02 on 10.4.11 and 10.5.3 at my place.

[TempoTanken]

hmm...could it be something else in my setup ?
I´ve repaired all disc permissions as well...

let me know if you need any further information.

Hans

[Angus_FX]

Oh, in L8, you need to be looking on a stereo instrument track, not a mono one. It won't show up on mono instrument tracks.

[TempoTanken]

YESSS ! It did the trick.

Thanks, your support is amazing !!!

-but that is stupid (logic 8 )
mono is important...


H

[rob_fx (ex-FX)]

YESSS ! It did the trick.

Thanks, your support is amazing !!!

-but that is stupid (logic 8 )
mono is important...


H

Tell the Apple/Logic team. You are preaching to the converted!

[sec_9]

Hi, I also got stumped with Logic's silly stereo out aux channel but, i do have an older L7 startup that i used with 2 guru's already set up on it and that seems to work, I will do some testing on
it tonight then i'll post the song file doc up on here for all to use........


Silly apple

Make us buy expensive gear then expect us to be happy with whatever they give us..........

See you later tonight sometime (by later tonight i mean about 4am tomorrow morning )

[sec_9]

Hey, I just had time for a play in Logic and Guru... I dont really know if anyone gives a damn about this any more but i thought that i'd share it with you anyway..

When you sat up Aux channel strips in Logic for your multi out Guru make sure (Like Angus said) to turn it into a stereo channel and then choose your Guru imputs..... From there if you click and hold on the stereo button at the bottom of the channel strip a little dialogue box pops up and from here you can select Left or Right channel. Do just that and hay pretsto, you got a working aux channel strip...
This has no doubt been worked out yonks ago but since no-one has posted this I thought I would.... I hope that it at least helps someone...

Peace out

Ash

[cylon]

Bumping this topic.

I have followed the instructions here and gotten Guru to be mutl-out. However, Say it's Guru channels 3-4, and those are all the kick sounds. How would I get it so that the kick sounds can go to different channels, and not all be consolidated into one channel? As of now this effectively only gives me four tracks in the Logic Mixer.

I'm sure it's something very basic, I literally just got Guru up and running.

[sec_9]

does this link give you any help?


http://www.youtube.com/watch?v=cJnrdhIQOqY&feature=channel_page

[cylon]

Thanks for the link sec_9,

I've actually gotten to this point. Following the instructions in this thread I have gotten four aux tracks dedicated to the sounds I want. Kick on 3-4, Snare on 5-6, etc.

The problem is, Guru has 16 different pads. It seems that each bank of pads is dedicated to one channel strip. So all my kick sounds will be on channel 3-4. All the snares are on channel 5-6. Since there are four "rows" of four pads each, it means the other twelve pads can't get their own unique channel strips.

Effectively, I have only four unique channel strips in the mixer, and each channel strip has multiple sounds coming out of it.

Sorry if I'm making this more convoluted than needs to be. I am not very well versed in channel strips, aux and things like that, I'm still learning to use Logic as well.

[Kickflip]

Could well be that you need to go into the Options and deselect 'Send Pad types to sub-outputs 1-4'. Have a look at that and see if it solves it!

[cylon]

Yes that was it precisely!

Thanks Kickflip. Now I think I can start to do some damage with Guru.

[Kickflip]

Enjoy.

[fattymatthews]

Could well be that you need to go into the Options and deselect 'Send Pad types to sub-outputs 1-4'. Have a look at that and see if it solves it!

Amen! Been pulling my hair out over this one. Glad people take the time to share this info! Thanks people. Time to make beats!
Does anyone know if there is a fix yet for the playback issue where Guru is playing back the pattern twice which means its all phased farted, the fix i have was to click on a blank pattern in the pattern window, however each time you reopen logic, you have to go through this again, find a blank pattern and click on it.