Page 1 of 1

Only engine 1 responding to all MIDI channels?

Posted: Mon Jun 15, 2009 11:00 pm
by graz20
Hi

With GURU 1.6 and LIve8.02 on XP

When sending MIDI data to GURU (vst) from a nanoKONTROL, on channels other than 1:

Live correctly shows the channel it is receiving data on (e.g. 2), but GURU responds as if the data were being sent on channel 1 - i.e. only Engine 1 responds. I've tried all different channels and the problem is the same.

Anyone with similar, or fixes, or help?

Many thanks

Posted: Tue Jun 16, 2009 2:27 pm
by rob_fx (ex-FX)
I'm afraid no matter what you do, LIVE will merge all midi input streams into a signal stream on channel #1 into the instrument track. This is why you can't trigger the other engines when hosting in LIVE - GURU will only receive data from LIVE on channel #1.

You might want to look around for some MIDI loop-back tool that will help you get around this limitation.

Posted: Tue Jun 16, 2009 3:02 pm
by Drew_BFDTeam
You could try using something like Plogue Bidule as a VSTi inside live.

Posted: Tue Jun 16, 2009 4:13 pm
by graz20
rob_fx and Drew_fx,

Many thanks for your help! Glad to know it's not just me going mad...

I'll work something out with maple and or bidule,

cheers!