GURU Midi Channel 10 - Fxpansion.com

Forum

FXpansion Forum

GURU Midi Channel 10

Support for GURU

Moderators: Drew_fx, clare_fx, SKoT_FX, Steve_FX, john emrich, Mully_FX, mayur_FX, Angus_FX, Andreas_FX, Rory_FX, Rhi_FX, Paul_fx, Moderators

gbrennan
Posts: 11
Joined: Thu Jan 19, 2006 12:05 am

GURU Midi Channel 10

Postby gbrennan » Thu Sep 16, 2010 10:25 pm

The default midi sent by GURU is the pad data for engines 1 to 8 on midi channels 1 to 8.

I know that channel 10 maps all pads on note numbers from 0 to 127. Is it possible to send channel 10 out from GURU?

I'd like to use GURU to control 128 pads on Battery 3.

User avatar
Rory_FX
Posts: 2495
Joined: Tue Oct 12, 2004 4:56 pm
Location: FXP:MCR

Postby Rory_FX » Fri Sep 17, 2010 10:18 am

Sorry, the output midi implementation is fixed. Depending on your host you could probably set up some elaborate midi transforming that transposed and re-channelized Guru's output. Or you could just load your samples into Guru ;)

gbrennan
Posts: 11
Joined: Thu Jan 19, 2006 12:05 am

Postby gbrennan » Fri Sep 17, 2010 10:55 am

Rory - thanks for the fast response.

It was just a long shot! Having read the huge GURU MIDI implementation chart, I thought this might be one feature too far!

Ableton doesn't have much in the way of midi processing to create what would be required here - and my days of configuring the environment in Logic are over - I don't have enough hours in a day for that!

I use GURU in every track. However, sometimes I like to use the sound processing in battery -especially the new SP1200 aliasing filter. In fact, put that on the wish list for GURU 2 - a filter which models the crunch of the MPC60 and SP1200.

User avatar
Rory_FX
Posts: 2495
Joined: Tue Oct 12, 2004 4:56 pm
Location: FXP:MCR

Postby Rory_FX » Tue Sep 21, 2010 9:07 am

gbrennan - No probs. I haven't tried Battery's new filters, but if you are looking for MPC/SP crunch, you can get close in Guru by using the Bit Crusher effect. That will get you the 12bit crunch. Then to simulate the characterful D>A convertors you want to overdrive the signal after the bitcrushing. Try Applying bitcrusher as a pad effect, and then using the Aux Sends to apply some overdrive (Tubedrive or OD are probably best). I'm sure it won't be exactly the same, but it'll get you close.

gbrennan
Posts: 11
Joined: Thu Jan 19, 2006 12:05 am

Postby gbrennan » Tue Sep 21, 2010 9:25 am

Thanks Rory.

There's a easier way of creating the 12 bit mu-law with aliasing - just use this:

http://www.d16.pl/index.php?menu=203

User avatar
Rory_FX
Posts: 2495
Joined: Tue Oct 12, 2004 4:56 pm
Location: FXP:MCR

Postby Rory_FX » Tue Sep 21, 2010 10:16 am

Yeah that's another option, sub-outputs plus plugins :)


Return to “GURU”

Who is online

Users browsing this forum: No registered users and 2 guests